All three SewTech long-bar magnetic hoops for Brother SE700 / PE545-class machines in one set: the 1.5"×2.5" (40×60 mm) SA431MK, the 4"×4" (100×100 mm) SA432MK and the 100×170 mm SA434MK.
Small hoop for cuffs, collars and name tags; 4×4 for logos and monograms; the large frame for shirt fronts and totes. Buying the set saves versus the three hoops separately.
Why SewTech long-bar magnetic hoops
- Long-bar magnets, not spot magnets. Each bar clamps along the full edge of the frame for even pressure, so fabric stays flat with no shifting or puckering.
- Hoop in seconds. Lay your stabilizer and fabric on the base, set the magnets, and go — no screws, no wrestling an inner ring.
- Handles thick and tricky materials. Towels, denim, fleece, knits and canvas all hoop without hoop burn.
- Easy to straighten. Lift one magnet, nudge the fabric, set it back down. No re-hooping.
- Soft-coated base frame. Protects delicate fabrics and keeps them from sliding while you stitch.
- Peg-style connection that seats directly in your machine’s hoop slot, just like the factory hoop.
What’s in the box
- SA431MK hoop 40×60 mm + 4 long-bar magnets
- SA432MK hoop 100×100 mm + 8 long-bar magnets
- SA434MK hoop 100×170 mm + 8 long-bar magnets
- Grid template for each hoop
Works with these current Brother & Baby Lock models: Brother PE545, SE700.
Also fits (per SewTech): Brother SE725, SE625, SE600, SE630, SE400, SE425, SE350, SE270D, PE535, PE550D, PE540D, PE500, PE525, LB6800, LB5000, M380D, NS1750D, NS1850D.
How to use
- Mark the center of your design on the fabric.
- Lay stabilizer, then fabric, over the bottom frame and line up your marks with the grid template.
- Set the long-bar magnets one at a time, smoothing the fabric flat as you go.
- Slide the hoop into your machine and stitch.
A magnetic hoop must fit within your machine’s maximum embroidery field — match the hoop size to your machine. Not sure? Call or stop by any ICanHelpSew location and we’ll confirm the fit for your model.