SewTech’s large long-bar magnetic hoop for Brother SE700 and the SE/PE 4×4 family — SewTech’s “5×7” frame with a 100×170 mm (about 4"×6.7") inside dimension.
Gives SE700-class machines their biggest hooping area for shirt fronts, tote bags and taller monograms. Check that your design fits inside your machine’s maximum stitch field before you start.
Why SewTech long-bar magnetic hoops
- Long-bar magnets, not spot magnets. Each bar clamps along the full edge of the frame for even pressure, so fabric stays flat with no shifting or puckering.
- Hoop in seconds. Lay your stabilizer and fabric on the base, set the magnets, and go — no screws, no wrestling an inner ring.
- Handles thick and tricky materials. Towels, denim, fleece, knits and canvas all hoop without hoop burn.
- Easy to straighten. Lift one magnet, nudge the fabric, set it back down. No re-hooping.
- Soft-coated base frame. Protects delicate fabrics and keeps them from sliding while you stitch.
- Peg-style connection that seats directly in your machine’s hoop slot, just like the factory hoop.
What’s in the box
- SA434MK magnetic hoop, 100×170 mm
- 8 long-bar magnets
- Grid template
Works with these current Brother & Baby Lock models: Brother PE545, SE700.
Also fits (per SewTech): Brother SE725, SE625, SE600, SE630, SE400, SE425, SE350, SE270D, PE535, PE550D, PE540D, PE500, PE525, LB6800, LB5000, M380D, NS1750D, NS1850D.
How to use
- Mark the center of your design on the fabric.
- Lay stabilizer, then fabric, over the bottom frame and line up your marks with the grid template.
- Set the long-bar magnets one at a time, smoothing the fabric flat as you go.
- Slide the hoop into your machine and stitch.
A magnetic hoop must fit within your machine’s maximum embroidery field — match the hoop size to your machine. Not sure? Call or stop by any ICanHelpSew location and we’ll confirm the fit for your model.