SewTech’s 5"×12" (130×300 mm) long-bar magnetic hoop for Brother PE900, SE2000, NS1250E and the PE770/PE800 family with a 5×12 multi-position field, plus Baby Lock Bloom.
Made for borders, towel ends, sashes, table runners and multi-position designs. Ten long bars keep a long strip of fabric flat end to end.
Why SewTech long-bar magnetic hoops
- Long-bar magnets, not spot magnets. Each bar clamps along the full edge of the frame for even pressure, so fabric stays flat with no shifting or puckering.
- Hoop in seconds. Lay your stabilizer and fabric on the base, set the magnets, and go — no screws, no wrestling an inner ring.
- Handles thick and tricky materials. Towels, denim, fleece, knits and canvas all hoop without hoop burn.
- Easy to straighten. Lift one magnet, nudge the fabric, set it back down. No re-hooping.
- Soft-coated base frame. Protects delicate fabrics and keeps them from sliding while you stitch.
- Peg-style connection that seats directly in your machine’s hoop slot, just like the factory hoop.
What’s in the box
- SA445MK magnetic hoop, 130×300 mm
- 10 long-bar magnets
- Grid template
Works with these current Brother & Baby Lock models: Brother PE900, SE2000, NS1250E; Baby Lock Bloom.
Also fits (per SewTech): Brother PE700, PE750, PE770, PE780D, PE800, SE1900, SE1800, NS1150E, NS2750D.
How to use
- Mark the center of your design on the fabric.
- Lay stabilizer, then fabric, over the bottom frame and line up your marks with the grid template.
- Set the long-bar magnets one at a time, smoothing the fabric flat as you go.
- Slide the hoop into your machine and stitch.
A magnetic hoop must fit within your machine’s maximum embroidery field — match the hoop size to your machine. Not sure? Call or stop by any ICanHelpSew location and we’ll confirm the fit for your model.